An Enhanced Glowworm Swarm Optimization for Minimizing Surface Roughness in Die Sinking Electrical Discharge Machining
Article Sidebar
Main Article Content
Abstract
Electric Discharge Machining (EDM) is a non-traditional machining process that utilizes electric sparks between an electrode and a workpiece submerged in a dielectric fluid to ablate a material. It is commonly used in die-making, aerospace, automotive manufacturing, and medical manufacturing, because it can machine hard and complex materials with high precision. In this work, a Surface Roughness Optimization for EDM (SRO-EDM) model is proposed to investigate the machining performance of the die-sinking EDM process of titanium alloys. A regression-based combined approach of Glowworm Swarm Optimization (GSO) and a Two-Factor Interaction (2FI) model has been proposed to investigate the impact of four key process variables, namely voltage (V), peak current (Ip), pulse-on time (ton), and pulse-off time (toff) on surface roughness (Ra) at various locations on work surfaces. A Central Composite Design (CCD) was applied to systematically investigate parameter combinations. Statistical analysis was performed using analysis of variance (ANOVA), which confirmed the statistical significance of the selected parameters, and 2FI regression (R² = 0.60) with moderate-fit predictive accuracy was established. To enhance the quality of optimization, the Enhanced Glowworm Swarm Optimization (EGSO) algorithm is proposed by hybridizing the GSO with Artificial Fish Swarm (AFS) algorithm. The AFS module improves the exploration capability of the GSO and alleviates the local optima problem. For the experimental validation of the model, Response Surface Methodology (RSM) was used to generate the regression based on the developed model and as an objective function for optimization. Experimental results show that EGSO outperforms GSO in performance to achieve an optimized Ra ( ) compared to through conventional GSO. The results demonstrate that the EGSO model can improve convergence accuracy and speed and is a practical method for EDM surface quality optimization in the high-precision manufacturing industry.
Article Details
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
All articles published in JIWE are licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0) License. Readers are allowed to
- Share — copy and redistribute the material in any medium or format under the following conditions:
- Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use;
- NonCommercial — You may not use the material for commercial purposes;
- NoDerivatives — If you remix, transform, or build upon the material, you may not distribute the modified material.
References
W. Ming et al., “Progress in non-traditional machining of amorphous alloys,” Ceram Int, vol. 49, no. 2, pp. 1585–1604, Jan. 2023, doi: 10.1016/j.ceramint.2022.10.349.
N. Zainal, A. Mohd Zain, S. Sharif, H. Nuzly Abdull Hamed, and S. Mohamad Yusuf, “An integrated study of surface roughness in EDM process using regression analysis and GSO algorithm,” in Journal of Physics: Conference Series, Institute of Physics Publishing, Sep. 2017, doi: 10.1088/1742-6596/892/1/012002.
Ajit, D. K. Bhalla, and S. Sundriyal, “A Comparative Study of Die-Sinking and Near-Dry EDM Using MADM-Based Parameter Optimization,” MAPAN, Nov. 2025, doi: 10.1007/s12647-025-00864-4.
M. P. Uddin, A. Majumder, J. D. Barma, and S. Mirjalili, “An Improved Multi-Objective Harris Hawks Optimization Algorithm for Solving EDM Problems,” Arab J Sci Eng, vol. 50, no. 15, pp. 12403–12448, Aug. 2025, doi: 10.1007/s13369-024-09694-z.
V. Choudhari et al., “A Review on Electric Discharge Machining with Assisted Processes for Precise Machining of Hard to Cut Materials,” 2026, pp. 700–712, doi: 10.1007/978-981-95-1750-3_80.
P. Karmiris-Obratanski, E. L. Papazoglou, B. Leszczynska-Madej, K. Zagorski, and A. P. Markopoulos, “A comprehensive study on processing ti–6al–4v eli with high power edm,” Materials, vol. 14, no. 2, pp. 1–17, Jan. 2021, doi: 10.3390/ma14020303.
H. Sharma, and B. Singh, “Experimental design based optimization of process parameters for EDM of AA6068,” Mater Today Proc, Feb. 2023, doi: 10.1016/j.matpr.2023.02.166.
H. Sharma, and B. Singh, “Experimental design based optimization of process parameters for EDM of AA6068,” Mater Today Proc, 2023, doi: 10.1016/j.matpr.2023.02.166.
N. Zainal, A. Mohd Zain, and S. Sharif, “A study of electrode wear ratio on EDM of Ti-6AL-4V with copper-tungsten electrode,” in MATEC Web of Conferences, 2016, doi: 10.1051/matecconf/20167801013.
B. Gugulothu, “Optimization of process parameters on EDM of titanium alloy,” in Materials Today: Proceedings, Elsevier Ltd, Jan. 2020, pp. 257–262, doi: 10.1016/j.matpr.2019.10.150.
C. Qu, and W. He, “A Cuckoo Search Algorithm with Complex Local Search Method for Solving Engineering Structural Optimization Problem,” MATEC Web of Conferences, vol. 40, p. 09009, Jan. 2016, doi: 10.1051/matecconf/20164009009.
F. C. M. Ortiz, and C. J. Costa, "RPA in Finance: supporting portfolio management: Applying a software robot in a portfolio optimization problem,”in 2020 15th Iberian Conference on Information Systems and Technologies (CISTI), IEEE, Jun. 2020, pp. 1–6, doi: 10.23919/CISTI49556.2020.9141155.
M. AL-Alawi, Y. Mohamed, and A. Bouferguene, “Application of industrial pipelines data generator in the experimental analysis: Pipe spooling optimization problem definition, formulation, and testing,” Advanced Engineering Informatics, vol. 43, p. 101007, Jan. 2020, doi: 10.1016/j.aei.2019.101007.
R. Alizadehsani et al., “Swarm Intelligence in Internet of Medical Things: A Review,” Sensors, vol. 23, no. 3, p. 1466, Jan. 2023, doi: 10.3390/s23031466.
S. Janakiraman, “A Hybrid Ant Colony and Artificial Bee Colony Optimization Algorithm-based Cluster Head Selection for IoT,” Procedia Comput Sci, vol. 143, pp. 360–366, 2018, doi: 10.1016/j.procs.2018.10.407.
C. B. Kalayci, A. Hancilar, A. Gungor, and S. M. Gupta, “Multi-objective fuzzy disassembly line balancing using a hybrid discrete artificial bee colony algorithm,” J Manuf Syst, vol. 37, pp. 672–682, Oct. 2015, doi: 10.1016/j.jmsy.2014.11.015.
A. Bassel, S. Adnan Abed, S. Abdullah, M. Jan Nordin, and A. Turky, “An Improved Glowworm Swarm Optimization Based on Various Mutation Operators,” IEEE Access, vol. 12, pp. 106359–106384, 2024, doi: 10.1109/ACCESS.2024.3436899.
C. B. Kalayci, A. Hancilar, A. Gungor, and S. M. Gupta, “Multi-objective fuzzy disassembly line balancing using a hybrid discrete artificial bee colony algorithm,” J Manuf Syst, vol. 37, pp. 672–682, Oct. 2015, doi: 10.1016/j.jmsy.2014.11.015.
Y. Zhou, G. Zhou, and J. Zhang, “A hybrid glowworm swarm optimization algorithm to solve constrained multimodal functions optimization,” Optimization, vol. 64, no. 4, pp. 1057–1080, Apr. 2015, doi: 10.1080/02331934.2013.793329.
R. Karthikeyan, and P. Alli, “Feature Selection and Parameters Optimization of Support Vector Machines Based on Hybrid Glowworm Swarm Optimization for Classification of Diabetic Retinopathy,” J Med Syst, vol. 42, no. 10, p. 195, Oct. 2018, doi: 10.1007/s10916-018-1055-x.
J. Zhou, and S. Dong, “Hybrid glowworm swarm optimization for task scheduling in the cloud environment,” Engineering Optimization, vol. 50, no. 6, pp. 949–964, Jun. 2018, doi: 10.1080/0305215X.2017.1361418.
X. Chen, Y. Zhou, Z. Tang, and Q. Luo, “A hybrid algorithm combining glowworm swarm optimization and complete 2-opt algorithm for spherical travelling salesman problems,” Appl Soft Comput, vol. 58, pp. 104–114, Sep. 2017, doi: 10.1016/j.asoc.2017.04.057.
Z. Tang, and Y. Zhou, “A Glowworm Swarm Optimization Algorithm for Uninhabited Combat Air Vehicle Path Planning,” Journal of Intelligent Systems, vol. 24, no. 1, pp. 69–83, Mar. 2015, doi: 10.1515/jisys-2013-0066.
M. M. Annie Alphonsa, and P. Amudhavalli, “Genetically modified glowworm swarm optimization based privacy preservation in cloud computing for healthcare sector,” Evol Intell, vol. 11, no. 1–2, pp. 101–116, Oct. 2018, doi: 10.1007/s12065-018-0162-4.
A. Soundhar, H. A. Zubar, M. T. B. H. H. Sultan, and J. Kandasamy, “Dataset on optimization of EDM machining parameters by using central composite design,” Data Brief, vol. 23, p. 103671, Apr. 2019, doi: 10.1016/j.dib.2019.01.019.
C. Sivamathi, G. S. Karthick, and S. Vijayarani, “Glowworm Swarm Optimization Algorithm for Retrieval of High Utility Itemsets,” in 2024 International Conference on Smart Systems for Electrical, Electronics, Communication and Computer Engineering (ICSSEECC), IEEE, Jun. 2024, pp. 111–116. doi: 10.1109/ICSSEECC61126.2024.10649418.
S. K. Suman, and O. P. Suman, “A Metaheuristic Mutation-Based Glowworm Swarm Optimization Model for Balancing Load in a Cloud Computational Environment,” 2026, pp. 247–261. doi: 10.1007/978-981-96-7614-9_19.
S. Perumal, J. Vijayaraj, and D. Prabakar, “Optimizing energy efficiency and coverage in wireless sensor networks using Delaunay Triangulation and glowworm swarm optimization,” Peer Peer Netw Appl, vol. 18, no. 6, p. 318, Oct. 2025, doi: 10.1007/s12083-025-02103-8.
I. Singh, H. Malhotra, Shruti, S. Jain, S. Kumar Jha, and Y. Kumar Pal, “Evolutionary Neuro-Fuzzy Network and Novel Hybrid Adaptive Crow Search-Modified Glowworm Swarm Optimization for Credit Card Fraud Detection,” 2024, pp. 309–318. doi: 10.1007/978-3-031-70018-7_34.
N. Zainal, A. M. Zain, and S. Sharif, “Overview of Artificial Fish Swarm Algorithm and its Applications in Industrial Problems,” Applied Mechanics and Materials, vol. 815, pp. 253–257, Nov. 2015, doi: 10.4028/www.scientific.net/AMM.815.253.
F. Pourpanah, R. Wang, C. P. Lim, X.-Z. Wang, and D. Yazdani, “A review of artificial fish swarm algorithms: recent advances and applications,” Artif Intell Rev, vol. 56, no. 3, pp. 1867–1903, Mar. 2023, doi: 10.1007/s10462-022-10214-4.
V. Kourepinis, C. Iliopoulou, I. Tassopoulos, and G. Beligiannis, “An artificial fish swarm optimization algorithm for the urban transit routing problem,” Appl Soft Comput, vol. 155, p. 111446, Apr. 2024, doi: 10.1016/j.asoc.2024.111446.
J. Han, J. Zhu, Y. Zhang, Z. Zhao, and Z. An, “Optimization of machining process route for internal joint parts using artificial fish swarm algorithm,” Journal of Advanced Mechanical Design, Systems, and Manufacturing, vol. 19, no. 1, p. 2025jamdsm0009, 2025, doi: 10.1299/jamdsm.2025jamdsm0009.