Development and Testing of A Mini Coin Sorting Machine
Article Sidebar
Main Article Content
Abstract
Mini coin sorter machine is a device used to organise and separate coins into their respective category, either value or coin size. Many users tend to store mixed coins in a single container without properly categorizing them, which causes inconvenience and disorganization. The current project aims to address the problem by providing a practical solution and a low cost for sorting and managing coins systematically and effectively. The study was conducted to design, fabricate, and test a functional machine prototype of the mini coin sorter. The study outlines the concept used and the mechanism involved in the detailed fabrication process, as well as relevant engineering principles and the associated costs. Additionally, an analysis of the machine's operation was conducted to evaluate its performance and highlight the advantages and limitations of the machine. Due to the use of the material and the limitations of the machine, future improvements will be provided to enhance efficiency and durability in future machine development.
Article Details
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
References
[1] LTD, G. Japan’s First Coin Counter chosen as ‘Mechanical Engineering Heritage. 2015.
[Available Online on 12 Oct 2025] https://corporate.glory-global.com/groupinfo/news/detail/id=581.
[2] R. A. C. Reyes, M. P. P. Tan and T. J. O. Torralba, "Coin Sorting and Counting Machine," BSc Report, Mapua Institute of Technology, 2008.
[3] A. Paramasivam, P. Vidhushini, N. Arunprakash, S. P. Srinivasan, S. Panneer selvan and V. Kakulapati, "Design and Modelling Of Coin Sorting Machine," Nat. Volatiles & Essent. Oils, vol. 8, no. 4, pp. 8202-8208, 2021.
[4] P. Vighea et al., "Coin Counting and Sorting Machine," Int. J. Eng. and Creat. Sci., vol. 4, no. 7, pp. 4-11, 2021.
[5] N. D. I. Astapa Kamal and M. F. S. Khalid, "Design and Fabrication of A Coin Separator Machine," Universiti Teknologi MARA Institutional Respository, pp. 1-320, 2023.
[6] Vae E. Sun and Jens H. Molbak, "Coin Counter/Sorter and Coupon/Voucher Dispensing Machine and Method," Patent no. US7028827B1, US, 2006.
[7] J. R. Blake, C. W. Hallowell, T. M. Jagielinski, "Systems, Methods and Devices for Managing Rejected Coins during Coin Processing," Patent no. US9430893B1, US, 2016.
[8] F. Klimenda and J. Soukup, "Modal Analysis of Thin Aluminium Plate," Proc. Eng., vol. 177, pp. 11-16, 2017.
[9] A. A. Petunin and C. Stylios, "Optimization Models of Tool Path Problem for CNC Sheet Metal Cutting Machines," IFAC-PapersOnLine, vol. 49, no. 12, pp. 23-28, 2016.
[10] A. Kulkarni, M. Pawar, P. Yadav, A. Patil, S. Jagtap and S. Malgave, "Sheet Metal Bending Machine," Int. J. Innov. in Eng. Res. and Technol., vol. 2, no. 3, pp. 1-21, 2015.
[11] Z. C. Lin and D. Y. Chang, "Selection of Sheet Metal Bending Machines by The PRISM-Inductive Learning Method," J. Intellig. Manufact., vol. 7, no. 4, pp. 341-349, 1996.
[12] A. Dawood, B. Marti Marti, V. Sauret-Jackson and A. Darwood, "3D Printing in Dentistry," British Dent. J., vol. 219, no. 11, pp. 521-529, 2015.
[13] W. Oropallo and L. A. Piegl, "Ten Challenges in 3D Printing," Eng. with Comput., vol. 32, no. 1, pp. 135-148, 2016.
[14] A. Kusko and S. Peeran. "Definition of The Brushless DC Motor," in Conf. Rec. the 1988 IEEE Indust. Appl. Soc. Annual Meeting, Pittsburgh, PA, USA, vol.1, pp. 20-22, 1988.
[15] R. V. Petrova, "Introduction to Static Analysis using Solidworks Simulation," CRC Press, 2014.
[16] D. M. Dumaliang, J. M. Q. Rigor, R. G. Garcia, J. F. Villaverde and J. R. Cuñado, "Coin Identification and Conversion System using Image Processing," in 2021 IEEE 13th Int. Conf. on Human., Nanotechnol., Informat. Technol., Commun. and Contr., Environ., and Manage., Manila, Philippines, pp. 1-6, 2021.