The following manuscripts will be appeared in 15 September 2026 as Vol. 8, Issue No. 2.

No. 1. The Effect on Electrophysiology Pattern After Electronic Near Task

Saiful Azlan Bin Rosli^{1, 2}, Annera Lea Banus³ and Ahmad Mursyid Bin Ahmad Rudin^{1, 2,} *

¹Centre of Optometry, Universiti Teknologi MARA, Selangor, Malaysia.

²Optometry and Visual Sciences Research Group (iROViS), Universiti Teknologi MARA, Selangor, Malaysia.

³Carl Optometrist, Ranau, Sabah, Malaysia.

^*Corresponding author: mursyid@uitm.edu.my, ORCiD: 0009-0007-3954-5699

https://doi.org/10.33093/jetap.2026.8.2.1, pp. 1-8.

Manuscript Received: 11 September 2025, Revised: 7 October 2025, Accepted: 2 January 2026, Published: 15 September 2026

No. 2. Smart Insole with Deep Learning for Real-Time Classification of Gait Abnormalities

Nur Rabiatul Adawiyah Veran, Ainnur Natasha Jamri and Anas Mohd Noor*

Faculty of Electronic Engineering & Technology, Universiti Malaysia Perlis, Arau, Malaysia.

^*Corresponding author: anasnoor@unimap.edu.my, ORCiD: 0000-0002-0410-3635

https://doi.org/10.33093/jetap.2026.8.2.2, pp. 9-15.

Manuscript Received: 3 August 2025, Revised: 23 September 2025, Accepted: 2 January 2026, Published: 15 September 2026

No. 3. Success Factors Impacting Artificial Intelligence Adoption - Perspective from The Telecom Industry in Malaysia

Suvitha Palani, Siva Priya Thiagarajah^* and Farzana Sharmin Nila

Faculty of Artificial Intelligence & Engineering (FAIE), Multimedia University Cyberjaya, Cyberjaya, Selangor

^*Corresponding author: siva.priya.thiagarajah@mmu.edu.my, ORCiD: 0000-0002-0024-7279

https://doi.org/10.33093/jetap.2026.8.2.3, pp. 16-25.

Manuscript Received: 13 August 2025, Revised: 28 SeptemberMon 2025, Accepted: 14 November 2025, Published: 15 September 2026

No. 4. Real-Time Performance Assessment of Process Control in Aluminium Wire Manufacturing Using Siemens S7-1200

Mya Thu Zar Moe^* and Win Kyaw Myint

¹Department of Electrical Power Engineering, West Yangon Technological University, Yangon, Myanmar.

^*Corresponding author: myamoethu111@gmail.com, ORCiD: 0009-0008-5637-3128

https://doi.org/10.33093/jetap.2026.8.2.4, pp. 26-31.

Manuscript Received: 15 August 2025, Revised: 12 November 2025, Accepted: 25 November 2025, Published: 15 September 2026

No. 5. Utilisation of Response Surface Methodology to Optimise Bandgap and Resistance of Nickel Oxide using The Sol-gel Method

Nurbahirah Norddin^{1, 2, 4, *}, Suhaidi Shafie^{2, 3}, Muhammad Idzdihar Idris¹, Xinzhi Liu^{2, 3}, Ismail Lawal^{2, 3} and Mohd Nizar Hamidon^{2, 3}

¹Faculty of Electronics and Computer Technology and Engineering, Technical University of Malaysia Melaka (UTeM), 75450 Melaka, Malaysia.

²Department of Electrical and Electronic Engineering, Faculty of Engineering, Universiti Putra Malaysia, 43400 Serdang, Selangor, Malaysia.

³Institute of Nanoscience and Nanotechnology, Universiti Putra Malaysia, 43400 Serdang, Selangor, Malaysia.

⁴Faculty of Electrical Technology and Engineering, Technical University of Malaysia Melaka (UTeM), 75450 Melaka, Malaysia.

^*Corresponding author: nurbahirah@utem.edu.my, ORCiD: 0000-0002-4687-1413

https://doi.org/10.33093/jetap.2026.8.2.5, pp. 32-40.

Manuscript Received: 18 August 2025, Revised: 14 November 2025, Accepted: 20 December 2025, Published: 15 September 2026

No. 6. Design and Development of Shrimp Paste Mould

Muhammad Ikman Ishak^{1, *}, Muhammad Izhar Ali¹ and Noor Alia Md Zain²

¹Fakulti Kejuruteraan & Teknologi Mekanikal, Universiti Malaysia Perlis (UniMAP), Kampus Alam UniMAP, Pauh Putra, 02600 Arau, Perlis, Malaysia.

²Fakulti Kejuruteraan & Teknologi Elektronik, Universiti Malaysia Perlis (UniMAP), Kampus Alam UniMAP, Pauh Putra, 02600 Arau, Perlis, Malaysia.

^*Corresponding author: ikman@unimap.edu.my, ORCiD: 0000-0003-0729-6599

https://doi.org/10.33093/jetap.2026.8.2.6, pp. 41-50.

Manuscript Received: 26 August 2025, Revised: 2 December 2025, Accepted: 20 December 2025, Published: 15 September 2026

No. 7. Development and Testing of A Mini Coin Sorting Machine

Ikhwan Hafiz Bin Hayaroni, Mohd Fahmi bin Md Salleh, Muhammad Amir bin Mat Shah and Ab Aziz bin Mohd Yusof^*

Faculty of Mechanical Engineering, Universiti Teknologi MARA (UiTM) Cawangan Johor, Masai, Johor, Malaysia.

^*Corresponding author: abaziz86@uitm.edu.my, ORCiD: 0000-0002-9700-0714  

https://doi.org/10.33093/jetap.2026.8.2.7, pp. 51-57.

Manuscript Received: 3 November 2025, Revised: 2 December 2025, Accepted: 20 December 2025, Published: 15 September 2026

No. 8. Integration of Multiplication and Floating-Point Extensions in Risc-V: Design and Synthesis

Tasigen Visvanathan, Chu Liang Lee^*, Kah Yoong Chan and C. Senthilpari

Faculty of Artificial Intelligence and Engineering (FAIE), Multimedia University, Cyberjaya, Malaysia.

^*Corresponding author: cllee@mmu.edu.my, ORCiD: 0009-0004-6837-1163

https://doi.org/10.33093/jetap.2026.8.2.8, pp. 58-69.

Manuscript Received: 15 July 2025, Revised: 6 September 2025, Accepted: 13 January 2026, Published: 15 September 2026

No. 9. Harnessing Magnetism: Cutting-Edge Applications and Scientific Advancements

Le Hoang My¹, Debora Smoorna Rongdi¹, Firas Labeed Al-amri¹, Evyan Yang Chia-Yan², Lau Kam Sheng³, Eric Su Han Chan⁴ and Chin Fhong Soon⁵

¹School of Foundation Study, Nilai University, 71800 Nilai, Negeri Sembilan, Malaysia.

²Department of Research and Innovation, Nilai University, 71800 Nilai, Negeri Sembilan, Malaysia.

³Department of Applied Physics, Faculty of Science and Technology, National University, 43600 Selangor, Malaysia.

⁴Faculty of Pharmacy and Biomedical Science, MAHSA University, 42610 Jenjarom, Selangor, Malaysia.

⁵Faculty of Electrical and Electronics Engineering, Universiti Tun Hussein Onn Malaysia, Parit Raja, Batu Pahat, Johor, 86400, Malaysia.

^*Corresponding author: evyanyang@nilai.edu.my, ORCiD: 0000-0003-0619-1103   

https://doi.org/10.33093/jetap.2026.8.2.9, pp. 70-78.

Manuscript Received: 1 July 2025, Revised: 6 September 2025, Accepted: 13 January 2025, Published: 15 September2026

No. 10. Revolutionising Construction Oversight with Drone Technology

Shahela Mamter^*, Nur Alia Munirah Muhammad Rizuan, Norazlin Mat Salleh, Mohd Esham Mamat and Farhan Md Dahlan

Department Of Built Environment Studies & Technology, Faculty of Built Environment, Universiti Teknologi MARA Perak Branch, 32610, Seri Iskandar Campus, Bandar Seri Iskandar, Perak, Malaysia.

^*Corresponding author: shahelauitm@gmail.com, ORCiD: 0009-0006-3936-6677

https://doi.org/10.33093/jetap.2026.8.2.10, pp. 79-84.

Manuscript Received: 23 August 2025, Revised: 17 November 2025, Accepted: 25 November 2025, Published: 15 September 2026

No. 11. Assessment of Physical Parameters of Indoor Air Quality in A Wastewater Treatment Plant Building: A Case Study

Mohd Izwan Masngut¹, Siti Munira Yasin^{2, 3, *}, Kamarulzaman Muzaini², Ayu Suriawaty Bahkia⁴, Nurhuda Ismail², Nik Nairan Abdullah², Noramira Nozmi³, Ahmad Faiz Azhari Noor⁵ and Ahmad Fitri Abdullah Hair⁵

¹Centre of Environmental Health & Safety, Faculty of Health Sciences, Universiti Teknologi MARA, Puncak Alam, Malaysia.

²Department of Public Health Medicine, Faculty of Medicine, Universiti Teknologi MARA, Sungai Buloh, Selangor, Malaysia.

³Workplace Health and Safety Solution Hub, Faculty of Medicine, Universiti Teknologi MARA, Sungai Buloh, Malaysia.

⁴Indah Water Konsortium Sdn Bhd, Kuala Lumpur, Malaysia.

⁵Occupational Health Division, Department of Occupational Safety and Health, Putrajaya, Malaysia.

^*Corresponding author: smunira@uitm.edu.my, ORCiD: 0000-0001-9072-5053

https://doi.org/10.33093/jetap.2026.8.2.11, pp. 85-91.

Manuscript Received: 17 September 2025, Revised: 28 January 2026, Accepted: 27 April 2026, Published: 15 September 2026

No. 12. 3D Modeling Using Drone Technology for Enhanced Building Information Modeling in Building Design

Muhammad Fareez Ridzuan Bin Jumahan, Mohd Najib Bin Husain*, Noorsazwan Bin Ahmad Pugi,

Mat Nizam Bin Uti, Haslina  Bt Hashim and Munirah Bt Radin

Faculty of Built Environment, University of Technology MARA, Perak Branch, Seri Iskandar Campus,

Seri Iskandar, Malaysia.

^*Corresponding author: najib1979@uitm.edu.my, ORCiD: 0009-0000-0730-4638

https://doi.org/10.33093/jetap.2026.8.2.12, pp. 92-97.

Manuscript Received: 9 November 2025, Revised: 30 November 2025, Accepted: 27 April 2026, Published:15 September 2026

No. 13. Prediction of Insulin Doses for Diabetes Patients in Hospital using Voting Classifier

Hsu Wai Hnin^*

Department of Computer Engineering and Information Technology, West Yangon Technological University

Yangon, Myanmar.

 ^*Corresponding author: hsuwaipyplas01@gmail.com, ORCiD: 0000-0003-3650-9944

https://doi.org/10.33093/jetap.2026.8.13, pp. 98-103.

Manuscript Received: 13 January 2026, Revised: 13 February 2026, Accepted: 17 March 2026, Published: 15 September 2026

No. 14. Electricity Demand Forecasting using A Supervised Machine Learning Random Forest Algorithm

Abdul Halim Ikram Mohamed^*, Ruzlaini Ghoni and Mohd Tarmizi Ibrahim

Faculty of Engineering Technology, University College Tati, 24100 Kemaman, Terengganu, Malaysia.

*Corresponding author: 24D01001@siswa.uctati.edu.my, ORCiD: 0009-0003-0897-7780

https://doi.org/10.33093/jetap.2026.8.14, pp. 104-114.

Manuscript Received: 8 January 2026, Revised: 13 February 2026, Accepted: 17 March 2026, Published: 15 September 2026

No. 15. An Enhanced Security Lock Using A Split-Ring Resonator

Loh Siu Hong^{1, *}, Yeap Kim Ho¹, Tan Zi Kang¹, Lee Han Kee¹ and Tan Ming Hui²

¹Faculty of Engineering and Green Technology, Universiti Tunku Abdul Rahman, 31900 Kampar, Malaysia.

²Faculty of Innovation and Technology, School of Engineering, Taylor’s University, No. 1, Jalan Taylor's, 47500 Subang Jaya, Selangor, Malaysia.

^*Corresponding author: yeapkh@utar.edu.my, ORCiD: 0000-0001-7043-649X

https://doi.org/10.33093/jetap.2026.8.2.15, pp. 115-119.

Manuscript Received: 16 January 2026, Revised: 11 March 2026, Accepted: 17 March 2026, Published: 15 September 2026

No. 16. Voltage Profile and Power Loss Analysis of A Radial Distribution Network with Solar PV Integration

Soe Thiha Swe^{1, *} and Su Leit Naing²

¹Sustainable Energy Transition, Faculty of Climate Change and Sustainability, Asian Institute of Technology, Pathum Thani, Thailand.

²Department of Electrical Power Engineering, Polytechnic University (Dawei), Dawei, Myanmar.

*Corresponding author: soethihaswe123@gmail.com, ORCiD: 0009-0004-4248-9788

https://doi.org/10.33093/jetap.2026.8.2.16, pp. 120-125.

Manuscript Received: 28 February 2026, Revised: 11 March 2026, Accepted: 17 March 2026, Published: 15 September 2026

No. 17. Enhancement of Dry Reciprocating Wear Resistance of Aluminium 6061 and Polyamide 66 through Burnishing

Kean Ong Low^{1, 2, *} and Sindhu Jagjeet Singh²

¹Centre for Advanced Mechanical and Green Technology, Centre of Excellence for Robotics and Sensing Technologies, Multimedia University, Melaka, Malaysia.

²Faculty of Engineering and Technology, Multimedia University, Melaka, Malaysia.

^*Corresponding author: kolow@mmu.edu.my, ORCiD: 0000-0001-6124-9748

https://doi.org/10.33093/jetap.2026.8.2.17, pp. 126-133.

Manuscript Received: 8 January 2026, Revised: 10 March 2026, Accepted: 18 March 2026, Published: 15 September 2026

No. 18. Detecting Rough Handling Events in Parcel Transportation using Unsupervised Learning

Abeykoon Mudiyanselage Akila Thenuka Abeykoon and Khairul Rizuan Suliman^*

Department of Physical and Mathematical Science, Faculty of Science, Universiti Tunku Abdul Rahman, Kampar Campus, Jalan Universiti, Bandar Barat, 31900 Kampar, Perak, Malaysia.

^*Corresponding author: rizuans@utar.edu.my, ORCiD: 0000-0002-8925-2129

https://doi.org/10.33093/jetap.2026.8.2.18, pp. 134-141.

Manuscript Received: 31 January 2026, Revised: 10 March 2026, Accepted: 26 March 2026, Published: 15 September 2026

No. 19. Proximate Characterization of Sarawak Waste Biomass for Sustainable Bioenergy Applications

Ros Syazmini Mohd Ghani^{1, 2, 3, *}, Sofiyah Mohd Razali^{3, 4}, Mohamad Saiful Sulaiman^{1, 2, 3}, Madihan Yusof³ and Mohammad Shahril Osman²

¹School of Postgraduate Studies, University of Technology Sarawak, 96000 Sibu, Sarawak.

²School of Engineering and Technology, University of Technology Sarawak, 96000 Sibu, Sarawak.

³Centre of Excellence in Wood Engineered Products, University of Technology Sarawak, 96000 Sibu, Sarawak.

⁴School of Foundation Studies, University of Technology Sarawak, 96000 Sibu, Sarawak.

^*Corresponding author: ros.syazmini@uts.edu.my, ORCiD: 0000-0002-0015-5606

https://doi.org/10.33093/jetap.2026.8.2.19, pp. 142-149.

Manuscript Received: 6 February 2026, Revised: 10 March 2026, Accepted: 13 April 2026, Published: 15 September 2026

No. 20. Electrical Performance of Zn–Cu Plant-Based Cells in Aloe Vera: Leaf-Stem Comparison with Series and Parallel Scaling

Sk Rakibur Rahman¹, Eng Eng Ngu1^{1, 2}, Gwo Chin Chung¹, Wai Leong Pang³, Kar Ban Tan⁴, Muhammad Aqeel Ashraf¹, Ajay Kumar Singh⁵ and Kah Yoong Chan^{1, 6, *}

¹Faculty of Artificial Intelligence and Engineering, Multimedia University, Persiaran Multimedia, 63100, Cyberjaya, Selangor, Malaysia.

²Centre for Electric Energy and High Voltage Engineering, COE for Robotics and Sensing Technologies, Multimedia University, Persiaran Multimedia, 63100, Cyberjaya, Selangor, Malaysia.

³School of Engineering, , Faculty of Innovation & Technology, Taylor’s University, 47500 Subang Jaya, Selangor, Malaysia.

⁴Department of Chemistry, Faculty of Science, Universiti Putra Malaysia, 43400 Serdang, Selangor, Malaysia.

⁵Faculty of Electronics and Communication Engineering, NIIT University, Rajasthan, India.

⁶Centre for Advanced Devices and Systems, COE for Robotics and Sensing Technologies, Multimedia University, Persiaran Multimedia, 63100, Cyberjaya, Selangor, Malaysia.

^*Corresponding author: kychan@mmu.edu.my, ORCiD: 0000-0003-1076-5034

https://doi.org/10.33093/jetap.2026.8.2.20, pp. 150-156.

Manuscript Received: 9 February 2026, Revised: 10 March 2026, Accepted: 15 March 2026, Published: 15 September 2026

******************************************************************************************************

The following manuscripts will be appeared in 15 March 2027 as Vol. 9, Issue No. 1.

No. 1.  Performance Evaluation of An RFID-Based Smart Shoe System Enhancing Train Platform Safety for Visually Impaired Users

Aliyyah Nazihah Norizam^1,*, Noorlindawaty Md Jizat¹, Lo Yew Chiong¹,  Samir Salem Al-Bawri², Farid Zubir³, M. Muhsin⁴ and Yoshihide Yamada⁵

¹Faculty of Artificial Intelligence & Engineering, Multimedia University, Cyberjaya, Malaysia.

²Institute of Climate Change (IPI), Space Science Centre, Universiti Kebangsaan Malaysia, Malaysia.

³Wireless Communication Centre(WCC) Faculty of Electrical Engineering, UTM Johor Bahru, Malaysia.

⁴School of Electrical Engineering,Telkom University, Surabaya Campus, Indonesia.

⁵Communication Systems and Network (CSN i-Kohza) MJIIT,UTM KL, Malaysia.

^*Corresponding author: 1211103962@student.mmu.edu.my, ORCiD: 0009-0001-5345-9320

https://doi.org/10.33093/jetap.2027.9.1.1, pp. 1-10.

Manuscript Received: 8 February 2026, Revised: 17 March 2026, Accepted: 8 April 2026, Published: 15 March 2027

No. 2. Visualization and Prediction of Thermal Profile on Solar Panels using Minimum Temperature Measurement

Florence Chiao Mei Choong^*, Yun Ii Go and Mun Ping Yang

School of Engineering and Physical Sciences, Heriot-Watt University Malaysia, 1, Jalan Venna P5/2, Precinct 5, 62200 Putrajaya, Wilayah Persekutuan Putrajaya, Malaysia.

^*Corresponding author: f.choong@hw.ac.uk, ORCiD: 0000-0002-6958-8725

https://doi.org/10.33093/jetap.2027.9.1.2, pp. 11-18.

Manuscript Received: 23 February 2026, Revised: 11 March 2026, Accepted: 24 March 2026, Published: 15 March 2027

No. 3. Floating Solar Energy in Malaysia: A Preliminary Assessment

Siow Chun Lim^{1, *}, Mohammed M. F. Dawoud¹ and Haneen Radi Aljuhani²

¹Center for Electric Energy and High Voltage Engineering, COE Robotics & Sensing Technologies, Multimedia University, Persiaran Multimedia, Cyberjaya 63000, Malaysia.

²Ceer National Automotive Company, Al-Qairawan District, Riyadh 13535, Kingdom of Saudi Arabia.

^*Corresponding author: clsiow@mmu.edu.my, ORCiD: 0000-0003-2353-0103

https://doi.org/10.33093/jetap.2027.9.1.3, pp. 19-25.

Manuscript Received: 8 February 2026, Revised: 27 February 2026, Accepted: 17 March 2026, Published: 15 March 2027

No. 4. Experimental Investigation of Retrofit Angles in Mitigating Wave Overtopping on Vertical Seawalls

Melvin Ying Fan Kho¹, Wei Chek Moon^{1, *}, Dong Hao Sim², Jeffrey Howe Kai Wong³ and Reese Shien Tzi Kong¹

¹Department of Civil Engineering, Faculty of Engineering, Technology and Built Environment, UCSI University, 56000 Kuala Lumpur, Malaysia.

²Department of Mechanical Engineering, Faculty of Engineering Sciences, University College London, Gower St, London WC1E 6BT, United Kingdom.

³School of Energy Science and Engineering, Harbin Institute of Technology, Harbin 150001, China.

^*Corresponding author: MoonWC@ucsiuniversity.edu.my, ORCiD: 0000-0003-1484-8523

https://doi.org/10.33093/jetap.2027.9.1.4, pp. 26-32.

Manuscript Received: 30 January 2026, Revised: 27 February 2026, Accepted: 26 March 2026, Published: 15 March 2027

No. 5. X-GNNFraud: Credit Card Fraud Detection through Explainable Graph Learning

Lim Kai En¹, Pang Ying Han^{1, 2, *}, Ooi Shih Yin^{1, 2} and Khoh Wee How^{1, 2}

¹Faculty of Information Science and Technology, Multimedia University, Jalan Ayer Keroh Lama, 75450 Bukit Beruang, Melaka, Malaysia.

²Centre for Advanced Analytics, CoE for Artificial Intelligence, Multimedia University, Jalan Ayer Keroh Lama, 75450 Bukit Beruang, Melaka, Malaysia.

^*Corresponding author: yhpang@mmu.edu.my, ORCiD: 0000-0002-3781-6623

https://doi.org/10.33093/jetap.2027.9.1.5, pp. 33-41.

Manuscript Received: 6 February 2026, Revised: 10 March 2026,  Accepted: 2 April 2026, Published: 15 March 2027

No. 6. Challenges and Mitigation Methods in Implementing ARM-FPGA-based Heterogeneous Processors

Leo Adriano Richard^{1, *}, Lini Lee² and Natta Jindapetch³

 ¹Faculty of Artificial Intelligence and Engineering, Multimedia University, Cyberjaya, Selangor, Malaysia.

²Centre for Advanced Devices and Systems, Centre of Excellence for Robotics and Sensing Technologies, Multimedia University, Cyberjaya, Selangor, Malaysia.

³Faculty of Engineering, Prince of Songkhla University, Songkhla, Thailand.

^*Corresponding author: 1211103433@student.mmu.edu.my, ORCiD: 0009-0007-8618-4152

https://doi.org/10.33093/jetap.2027.9.1.6, pp. 42-51.

Manuscript Received: 17 February 2026, Revised: 17 March 2026, Accepted: 14 April 2026, Published: 15 March 2027

No. 7. Optimization of Binary and Ternary PFA-GGBS-Gypsum Geopolymers for Sustainable Built Environment Applications

Iqra Ashraf¹, Muhammad Hasnolhadi Samsudin^{2, *}, Hoe Kwan Wai² and Zhong Xian Ooi²

¹Faculty of Science, Universiti Tunku Abdul Rahman, Kampar, 31900, Perak, Malaysia.

²Faculty of Engineering and Green Technology, Universiti Tunku Abdul Rahman, Kampar, 31900, Perak, Malaysia.

*Corresponding author: hasnolhadi@utar.edu.my, ORCiD: 0000-0002-6600-5934

https://doi.org/10.33093/jetap.2027.9.1.7, pp. 52-61.

Manuscript Received: 24 January 2026, Revised: 27 February 2026, Accepted: 12 March 2026, Published: 15 March 2027

No. 8. A G Power Based Statistical Framework for Mobile Material and Machinery Procurement Adoption with Prototype Validation in Construction Projects

Muhammad Afiq Hashim, Mohd Ikmal Fazlan Rozli @ Rosli^* and Kay Dora Abd Ghani

School of Civil Engineering, College of Engineering, Universiti Teknologi MARA, Cawangan Pulau Pinang, Permatang Pauh, Penang Malaysia.

^*Corresponding author: ikmal601@uitm.edu.my, ORCiD: 0000-0001-8525-5173

https://doi.org/10.33093/jetap.2027.9.1.8, pp. 62-67.

Manuscript Received: 8 February 2026, Revised: 17 March 2026, Accepted: 31 March 2026, Published: 15 March 2027