IIoT-Based Real-Time Monitoring and Predictive Maintenance System for Air Conditioning Ducting Systems
Main Article Content
Abstract
This paper presents an Industrial Internet of Things (IIoT)-based real-time monitoring and predictive maintenance system for air-conditioning ducting environments. The proposed system integrates a mobile robotic platform equipped with environmental sensors—BME280 and MQ135—and an ESP32 microcontroller, along with LoRa SX1278 modules for long-range wireless data transmission. The system visualises sensor data through a PyQt5-based graphical user interface. It utilises a deep learning model trained on the author’s datasets to classify environmental conditions into 'Normal,' 'High Humidity,' or 'Fire.' Experimental results confirm the system's ability to operate reliably in metallic duct environments, ensuring secure data transmission and delivering accurate AI predictions. The study concludes with a discussion on system performance and future upgrades, including vision-based inspection.
Article Details

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
References
[1] M. Moleda, B. MalysiakMrozek, W. Ding, V. Sunderam and D. Mrozek, “From Corrective to Predictive Maintenance - A Review of Maintenance Approaches for the Power Industry,” Sensors, vol. 23, no. 13, pp. 5970, 2023.
[2] C. Stenström, P. Norrbin, A. Parida and U. Kumar, “Preventive and Corrective Maintenance – cost Comparison and Cost–benefit Analysis,” Struct. and Infrastruct. Eng., vol. 12, no. 5, pp. 603–617, 2015.
[3] M. R. Keith, An Introduction to Predictive Maintenance, 2nd Edn., Amsterdam: Butterworth-Heinemann, 2002.
[4] T. Zhu, Y. Ran, X. Zhou and Y. Wen, “A Survey on Intelligent Predictive Maintenance (IPdM) in the Era of Fully Connected Intelligence,” IEEE Commun. Surv. & Tutor., vol. 28, pp. 633-671, 2026.
[5] M. Kashyap, G. Verma and V. Sharma, “Empowering IoT Connectivity with LoRa Technology: A Deep Dive into Long-Range Communication,” Eng. Res. Expr., vol. 7, no. 1, pp. 015429, 2025.
[6] N. Goyal et al., “Predictive Maintenance of HVAC Systems using Machine Learning,” in Proc. Int. Conf. Innov. Comput. & Commun. 2022, pp. 8, 2023.
[7] T. Zvarivadza et al., “On the Impact of Industrial Internet of Things (IIoT)—Mining Sector Perspectives,” Int. J. Mini., Reclam. and Environ., vol. 38, no. 9, pp. 771–809, 2024.
[8] V. Abdullin, D. A. Shnayder, A. R. Khasanov and D. F. Tselikanov, “IIoT-Based Approach to Industrial Equipment Condition Monitoring: Wireless Technology and Use Cases,” in Proc. Global Smart Industry Conf., pp. 399–406, 2020.
[9] C. Resende et al., “TIP4.0: Industrial Internet of Things Platform for Predictive Maintenance,” Sensors, vol. 21, no. 14, pp. 4676, 2021.
[10] A. Augustin, J. Yi, T. Clausen and W. Townsley, “A Study of LoRa: Long Range & Low Power Networks for the Internet of Things,” Sensors, vol. 16, no. 9, pp. 1466, 2016.
[11] M. Cattani, C. A. Boano and K. Romer, “An Experimental Evaluation of the Reliability of LoRa Long Range Low Power Wireless Communication,” J. Sens. and Actuat. Netw., vol. 6, no. 2, pp. 7, 2017.
[12] A. Mullick, A. Hadi, D. P. Dahnil and Nor Mohd Razif Noraini, “Enhancing Data Transmission in Duct Air Quality Monitoring using Mesh Network Strategy for LoRa,” PeerJ Comput. Sci., vol. 8, pp. e939, 2022.
[13] W. A. Jabbar et al., “LoRaWAN-Based IoT System Implementation for Long-Range Outdoor Air Quality Monitoring,” Intern. Things, vol. 19, pp. 100540, 2022.
[14] P. V. Nikitin, D. D. Arumugam, M. J. Chabalko, B. E. Henty and D. D. Stancil, “Long Range Passive UHF RFID System Using HVAC Ducts,” Proc. IEEE, vol. 98, no. 9, pp. 1629–1635, 2010.
[15] Z. Sun et al., “Recent Advances in LoRa: A Comprehensive Survey,” ACM Trans. Sens. Netw., vol. 18, no. 4, pp. 67, 2022.
[16] L. Aldhaheri et al., “LoRa Communication for Agriculture 4.0: Opportunities, Challenges, and Future Directions,” IEEE Intern. Things J., vol. 12, no. 2, pp. 1380–1407, 2025.
[17] B. Abdallah et al., “Improving the Reliability of LongRange Communication against Interference for Non-Line-of-Sight Conditions in Industrial Internet of Things Applications,” Appl. Sci., vol. 14, no. 2, pp. 868, 2024.
[18] L. Aarif, M. Tabaa and H. Hachimi, “Performance Evaluation of LoRa Communications in Harsh Industrial Environments,” J. Sens. and Actuat. Netw., vol. 12, no. 6, pp. 80, 2023.
[19] A. Ucar, M. Karakose and N. Kirimca, “Artificial Intelligence for Predictive Maintenance Applications: Key Components, Trustworthiness, and Future Trends,” Appl. Sci., vol. 14, no. 2, pp. 898, 2024.
[20] J. Bi et al., “AI in HVAC Fault Detection and Diagnosis: A Systematic Review,” Ener. Rev., vol. 3, no. 2, pp. 100071, 2024.
[21] M. Gholamzadehmir, C. Del Pero, S. Buffa, R. Fedrizzi and N. Aste, “Adaptive-predictive Control Strategy for HVAC Systems in Smart Buildings – A Review,” Sustain. Citi. and Soc., vol. 63, pp. 102480, 2020.
[22] T. H. Vidhya, G. L. Deepak, K. V. Amruth and D. Ponnarasan, “WALL-E: A Robotic Duct Cleaning System,” in Proc. Int. Conf. Adv. Comput., Commun. and Appl. Informat., Chennai, India, pp. 1-7, 2024.
[23] S. M. Fakhruddin and M. Gooroochurn, “Duct Inspection and Monitoring Robot,” in Int. Conf. Artif. Intelli., Comput., Data Sci. and Appl., pp. 1–6, 2024.
[24] A. Bulgakov and D. Sayfeddine, “Air Conditioning Ducts Inspection and Cleaning Using Telerobotics,” Proc. Eng., vol. 164, pp. 121–126, 2016.