Development of an IoT-based Wireless Controlled Power Adapter
Article Sidebar
Main Article Content
Abstract
Energy waste issues in electrical appliances due to inefficient usage monitoring are commonly faced by almost every person. This project aims to develop a wireless controlled power adapter operates autonomously based on occupancy of a specific space. In this way, convenience is brought to the user, and energy waste could be prevented. This system provides two modes of operation: manual and automatic. Using the mobile phone user interface, the user can manually and wirelessly control the power adapter. When there are no occupants in the specific space, the system will automatically shut off the power adapter. In contrast, if a person is detected in a specific space, the power adapter will be automatically switched on. WIFI protocol is used for the entire communication system. Experimental demonstration has been conducted to show the functionality. This proposed system offers the user to control in a long-distance range as long as the system is connected to a random WIFI network.
Manuscript received: 27 Dec 2024 | Revised: 21 Jan 2025 | Accepted: 13 Feb 2025 | Published: 31 Mar 2025
Article Details
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
References
Y.S. Choi, "A Study on security characteristics and vulnerabilities of BAS (Building Automation System)", Journal of the Korea Academia-Industrial cooperation Society, vol. 18, no. 4, pp. 669-676, 2017.
DOI: https://doi.org/10.5762/KAIS.2017.18.4.669
H.L. Tsai, L.P. Truong, and W.H. Hsieh, "Design and Evaluation of Wireless Power Monitoring IoT System for AC Appliances", Energies, vol. 16, no. 1, pp. 163, 2022.
DOI: https://doi.org/10.3390/en16010163
T. Moore, "Low-Energy Housing as a Means of Improved Social Housing: Benefits, Challenges and Opportunities", Energy Performance in the Australian Built Environment, pp. 91-109, 2019.
DOI: https://doi.org/10.1007/978-981-10-7880-4_7
R. Morales-Caporal, A.S. Reyes-Galaviz, J.F. Casco-Vasquez and H.P. Martinez-Hernandez, "Development and Implementation of a Relay Switch Based on WiFi Technology," 2020 17th International Conference on Electrical Engineering, Computing Science and Automatic Control (CCE), pp. 1-6, 2020.
DOI: https://doi.org/10.1109/CCE50788.2020.9299142
T. Michaud, “Foundations of Web Design: Introduction to HTML & CSS”, New Riders, 2013.
Y. Thongkhao and W. Pora, “A Low-Cost Wi-Fi Smart Plug with On-off and Energy Metering Functions”, 13th International Conference on Electrical Engineering/Electronics, Computer, Telecommunications and Information Technology, pp. 1-5, 2016.
DOI: https://doi.org/10.1109/ECTICon.2016.7561264
I. Horvat, N. Lukac, R. Pavlovic and D. Starcevic, "Smart plug solution based on bluetooth low energy," 2015 IEEE 5th International Conference on Consumer Electronics - Berlin (ICCE-Berlin), pp. 435-437, 2015.
DOI: https://doi.org/10.1109/icce-berlin.2015.7391301
T. Komine and M. Nakagawa, "Fundamental analysis for visible-light communication system using LED lights", IEEE transactions on Consumer Electronics, vol. 50, no.1, pp. 100-107, 2004.
DOI: https://doi.org/10.1109/TCE.2004.1277847
M. Cui, Q. Wang and J. Xiong, "Breaking the limitations of visible light communication through its side channel," Proceedings of the 18th Conference on Embedded Networked Sensor Systems, pp. 232-244, 2020.
DOI: https://doi.org/10.1145/3384419.3430728
N. Litayem and A. Al-Sa’di, "Exploring the Programming Model, Security Vulnerabilities, and Usability of ESP8266 and ESP32 Platforms for IoT Development", 2023 IEEE 3rd International Conference on Computer Systems (ICCS), pp. 150-157, 2023.
DOI: https://doi.org/10.1109/ICCS59700.2023.10335558
M. Kashyap, V. Sharma and N. Gupta, "Taking MQTT and NodeMcu to IOT: communication in Internet of Things", Procedia computer science, vol. 132, pp. 1611-1618, 2018.
DOI: https://doi.org/10.1016/j.procs.2018.05.126
D. Hanes, G. Salgueiro, P. Grossetete, R. Barton, J. Henry, “IoT fundamentals: Networking technologies, protocols, and use cases for the internet of things”, Cisco Press, 2017.
URL:https://www.ciscopress.com/store/iot-fundamentals-networking-technologies-protocols-9781587144561
A. Apostu, F. Puican, G. Ularu, G. Suciu, and G. Todoran, “Study on advantages and disadvantages of Cloud Computing–the advantages of Telemetry Applications in the Cloud”, Recent advances in applied computer science and digital services, pp. 118-123, 2013.
URL:http://www.wseas.us/e-library/conferences/2013/Morioka/DSAC/DSAC-16.pdf
P. Sankar,R. Vallikannu, G. Justin, and S. Karg, “Ambient intelligence based LED lighting control system using BACnet protocol”, 2023 IEEE International Conference on Artificial Intelligence and Applications (ICAIA) Alliance Technology Conference (ATCON-1), pp.1-5, 2023.
DOI: https://doi.org/10.1109/ICAIA57370.2023.10169530
A. Kulkarni et al., "Silicon lens arrays for wafer level packaging of IR-sensors", Informatics, Electronics and Microsystems: TechConnect Briefs 2018, vol. 4, pp. 147-150, 2018.
URL:https://briefs.techconnect.org/wp-content/volumes/TCB2018v4/pdf/263.pdf
R. Harikrishnan and P. Sivagami, "Intelligent power saving system using PIR sensors," 2017 International conference of Electronics, Communication and Aerospace Technology (ICECA), Coimbatore, India, 2017, pp. 573-577.
DOI: https://doi.org/10.1109/ICECA.2017.8212729
G. Sasi, "Motion detection using passive infrared sensor using IoT", Journal of Physics: Conference Series, IOP Publishing, vol. 1717. No. 1., pp. 012067, 2021.
DOI: https://doi.org/10.1088/1742-6596/1717/1/012067
A.E. Cetin, Y. Ozturk, O. Hanosh and R. Ansari, "Review of signal processing applications of Pyroelectric Infrared (PIR) sensors with a focus on respiration rate and heart rate detection," Digital Signal Processing, vol. 119, pp. 103247, 2021.
DOI: https://doi.org/10.1016/j.dsp.2021.103247
H. Li, Z. Zhang, L. Zu, Y. Hao and H. Chang, "Micromechanical mode-localized electric current sensor," Microsystems & Nanoengineering, vol. 8, no. 1, 2022.
DOI: https://doi.org/10.1038/s41378-022-00375-1
H. Yan, Y. Xu, J. Zou, Y. Fang and F. Cai, " A Novel Open-Circuit Fault Diagnosis Method for Voltage Source Inverters With a Single Current Sensor," IEEE Transactions on Power Electronics, vol. 33, no. 10, pp. 8775-8786, 2018.
DOI: https://doi.org/10.1109/TPEL.2017.2776939
F. Remouit, R. M. Pablo and J. Engstrom, "Review of electrical connectors for underwater applications", IEEE Journal of Oceanic Engineering, vol. 43, no. 4, pp. 1037-1047, 2017.
DOI: https://doi.org/10.1109/JOE.2017.2745598
S. Chedup, D.N.K. Jayakody, B. Subba and H. Hydher, "Performance Comparison of Arduino IDE and Runlinc IDE for Promotion of IoT STEM AI in Education Process," Lecture Notes in Electrical Engineering, pp. 237-254, 2021.
DOI: https://doi.org/10.1007/978-981-16-0289-4_18
U. Sari, H.M. Pektas, O.F. Sen and H. Celik, "Algorithmic thinking development through physical computing activities with Arduino in STEM education," Education and Information Technologies, vol. 27, no. 5, pp. 6669-6689, 2022.
DOI: https://doi.org/10.1007/s10639-022-10893-0
R. Rikwan and A. Ma'arif, "DC Motor Rotary Speed Control with Arduino UNO Based PID Control", Control Systems and Optimization Letters, vol. 1, no. 1, pp. 27-31, 2023.
DOI: https://doi.org/10.59247/csol.v1i1.6
A. Aqeel, “Introduction to Arduino Uno - the Engineering Projects”, The Engineering Projects, 2018.
URL:https://www.theengineeringprojects.com/2018/06/introduction-to-arduino-uno.html
C. G. Ong, J. C. Fermano and A. C. P. Daniot II, "An Impact Study on the Arduino Programming Training for Beginners", Science International, vol. 34, no. 2, pp. 69-72, 2022.
URL: https://www.sci-int.com/pdf/637835425803920481.pdf
B. Evans, “Beginning arduino programming”, Apress, 2011.
E. Media’s, S. . and M. Rif’an, "Internet of Things (IoT): BLYNK Framework for Smart Home," KnE Social Sciences, vol. 3, no. 12, pp. 579, 2019.
DOI: https://doi.org/10.18502/kss.v3i12.4128
G. F.Avisyah, I. J. Putra, and S. S. Hidayat, "Open Artificial Intelligence Analysis using ChatGPT Integrated with Telegram Bot", Jurnal ELTIKOM, vol. 7, no. 1, pp. 60-66, 2023.
DOI: https://doi.org/10.31961/eltikom.v7i1.724
V.N. Sulistyawan et al., "Parking tracking system using ultrasonic sensor HC-SR04 and NODEMCU ESP8266 based IoT", IOP Conference Series: Earth and Environmental Science, IOP Publishing, vol. 1203, no. 1, pp. 012028, 2023.
DOI: https://doi.org/10.1088/1755-1315/1203/1/012028
M.M. Gabriel and K.P. Kuria, "Arduino uno, ultrasonic sensor HC-SR04 motion detector with display of distance in the LCD", International Journal of Engineering Research & Technology, vol. 9, no. 5, pp. 936-942, 2020.
DOI: https://doi.org/10.17577/IJERTV9IS050677
T. Bhuvaneswari, V. Chitra and G.C. Cheng, "Voice Controlled Home Automation System Design," International Journal on Robotics, Automation and Sciences, vol. 5, no. 2, pp. 94-100, 2023.
DOI: https://doi.org/10.33093/ijoras.2023.5.2.12
Thangavel, B. Thangavel, C. Venugopal, S. Immanuel, J.E. Raja and W.C. Chua, "Design and Development of Automated Solar Grass Trimmer with Charge Control Circuit," International Journal on Robotics, Automation and Sciences, vol. 6, no. 1, pp. 36-45, 2024.